With the rapid development of digital dentistry, the number of digital-related products has also increased, and digital products are now ubiquitous in dental clinics.
Dental milling machines are a crucial component in digital dentistry; they are also high-value products in the field,
Therefore, they pay close attention to its daily maintenance; however, most users focus on its "surface" aspects, such as appearance and
The cleaning of the warehouse and the replacement of water tanks, etc., have been neglected, while the "maintenance" of the gas that provides the driving force "internally" has been overlooked.
For outpatient clinics, it is necessary to have a clean and stable "power output" (stable air pressure, sufficient air flow, and no oil or water)
The gas also needs to operate quietly.
What consequences will arise from using a non-CADCAM dedicated air compressor?
1. Insufficient air pressure/air flow
The cutting machine has strict requirements for the air pressure and air flow of the air compressor (most air compressors commonly equipped with dental chairs cannot meet these requirements)
Requirements: Whenever any of the two conditions are not met, a strike will occur until the requirements are met.
2. Affect aesthetics and increase costs
When connecting the new cutting machine in the outpatient department to the air compressor, it is found that the original pipeline layout is no longer suitable for the current cutting operation
Regarding the placement of the cutting machine, if the exposed pipes are extended, there will be a messy pipeline layout that affects the aesthetics of the outpatient area. If the pipelines are re-arranged and laid,
This would require dismantling the original decoration of the outpatient clinic, significantly increasing the cost for the users.
What conditions must be met to choose a CADCAM-dedicated air compressor?
1. Dry air source
Most cutting machines on the market operate using pneumatic drive shafts, and when the air source provided by the air compressor is not sufficiently pure and dry, it can lead to issues
Problems such as rust and corrosion occur inside the cutting machine, affecting equipment accuracy and shortening its service life.
2. For medical use only, with protective coating
The compressed air will be temporarily stored in an internally treated air storage tank that has undergone rust and bacteria prevention measures, ensuring the cleanliness of the air source at its very beginning
If inferior material is used for the gas storage tank, it can contaminate the compressed air and affect the stable operation of the cutting machine.
3. Quiet operation
Industrial air compressors produce a lot of noise, such as when connected to dental cutting machines next to chairs, resulting in a loud clamor
The chaotic medical environment can make already anxious patients feel even more uncomfortable and increase the difficulty of the treatment process
The work efficiency of dedicated staff decreases.
4. It is ready to use immediately, compact and convenient.
Without the need to reset the pipeline layout, it can be directly and independently docked with a dental cutting machine. This contrasts with the traditional image of a "bulky" air compressor, which stands in stark contrast to the comfortable and pleasant image that dental clinics have always cultivated. This "contrast" has significantly tarnished the image and reputation of the clinic.
Oil-free and dry
The use of high-quality oil-free piston compressors effectively prevents contaminants from entering the compressed air in the machine head
Equipped with an air filter regulator and a membrane drying tower, it achieves dual drying to ensure that the dried gas enters the spindle of the cutting machine
For medical use only, with protective coating
The interior of the gas storage tank has undergone rust and bacteria prevention treatment, ensuring the purity of the gas source from the very beginning
stable and reliable
The maximum output working pressure of 0.8 MPa and the maximum flow rate of 137 L/min meet the operational needs of most brands of cutting machines
The required air flow rate is provided by a cooling fan installed at the rear, which can continuously provide stable air pressure while promptly dissipating heat from the operating machine, ensuring worry-free operation of the cutting machine.
Silent operation
Test environment: professional enclosed silent room
Test requirements: The decibel meter should be positioned about 1 meter away from the air compressor, with the air pressure increasing from 0 to 0.6 MPa
Test result: The highest noise level is only 48 decibels
Test conclusion: The improved process design and brand-new materials have resulted in a machine operating noise level below 50 decibels, creating a quiet and pleasant working environment
small and exquisite
With a minimal size of only 460*245*500mm and an exquisite appearance, it can be "hidden" in any corner of the outpatient department
Alright, have you learned how to make a choice?
Dainuo's professional sales and technical team
We provide technical guidance and ongoing maintenance for you 365 days a year
Jiangsu | Shanghai | Chengdu
Dainuo Medical Technology specializes in the integrated services of research, development, production, and sales of medical equipment for oral care and respiratory oxygen therapy. With the determination to "hone a sword for ten years" and a spirit of craftsmanship, we strive to deliver a superior experience to our customers.
Adhering to the core values of "customer first, passion, integrity, and progressiveness", Dainuo Medical Technology is committed to becoming an excellent and reliable comprehensive medical equipment service provider through continuous research and innovation, as well as the constant pursuit of high-quality details.
Dainuo Medical Technology [Subscription Account]
Contact us: 400-163-8878
Enhance the global status of China's dental equipment
